Painting the exterior of your home is one of the most effective ways to increase curb appeal and protect it from the elements. However, before you break out the paint brushes and rollers, it’s essential to prepare the surfaces for painting. Here are some tips to get your home ready for a new coat of paint.

Why is Surface Preparation Important?

Any painting professional will tell you – surface preparation is key to a successful painting project. Proper surface preparation will help you achieve professional-looking and long-lasting results. If the surface is not prepared correctly, or not prepared at all, the new paint will not adhere properly, resulting in premature peeling, cracking, or chipping. Not only that, but surface imperfections such as cracks, holes, and stains may show through the new coat of paint, detracting from its new appearance.

Surface Preparation Steps to Take

Here are the basic steps involved in preparing the surface of your home for painting:

Clean the Surface

The first step is to clean the surface thoroughly to remove any dirt, dust, grease, or other contaminants that may prevent the new paint from adhering properly. Depending on the type of surface and the level of dirt or grime, this may involve pressure washing, scrubbing with a simple cleaning solution, or wiping down the surface with a drop cloth.

Scrape and Sand

Next, peeling paint should be scraped off, and the surface should be sanded to create a smooth, even surface for the new paint to adhere to. This step is incredibly important when dealing with old paint or a previous poor application.

Repair any Surface Imperfections

Any surface cracks, holes, or other imperfections should be repaired before painting. This may involve filling in cracks or holes with a patching compound, smoothing out rough spots with a putty knife, or replacing damaged siding or trim.

Prime the Surface

Once the surface is clean, smooth, and free of imperfections, it should be primed to create a base coat for the new paint to adhere to. This step is especially important if the surface has never been painted before or if it has been previously painted with an oil-based paint.

Mask and Protect

Finally, any areas that should not be painted, such as windows, doors, or fixtures, should be masked off with painter’s tape or plastic sheeting to prevent overspray or accidental paint drips. This will keep these features clean and neat.

Additional Steps for Specific Surfaces

As there are different types of exterior surfaces, there may be additional steps to prepare your surfaces for painting. Here are some examples of additional steps as per the type of surface to prepare:

Wood

If your home has wood siding or trim, it may be necessary to replace any rotted or damaged wood before painting. Wood should be sanded and cleaned to remove any dirt, stains, or loose paint. And if the wood has never been painted before, it should be primed with a wood primer beforehand to improve adhesion and durability.

Stucco

Stucco surfaces need to be cleaned with a pressure washer and allowed to dry completely before painting. One way to ensure that the surface is completely dry, you can use moisture meters. In addition to this, any cracks or other damage should also be repaired with a stucco repair compound, and the surface should be primed with a masonry primer.

Brick

Brick surfaces should be cleaned with a pressure washer and allowed to dry completely before painting. Any cracks or other damage should be repaired with a brick repair compound, and the surface should be primed with a masonry primer.

Proper surface preparation is crucial to achieving professional-looking and long-lasting exterior surfaces of your home. By following the general steps and additional steps for specific surfaces, you can ensure that your home is ready for its new coat of paint.

Hire our Exterior Home Painters in River Oaks, TX

If you need help maintaining the exterior surfaces of your home, our expert painters are ready to provide you with exceptional exterior painting services and complete the transformation of your home.

At Leon Painting, we specialize in delivering high-quality residential painting services. Our expertise extends to both commercial and residential painting solutions, making us a one-stop solution for all your home maintenance and improvement needs.

We have over 40 years of combined experience and have completed numerous home improvement projects in River Oaks and surrounding areas. So if you need a reliable painting company for your home, you can trust us to deliver outstanding, highly-rated results.

Contact our painting specialists today at 832-843-1222.